Дополнительное Руководство для Ricoh AP610N
UNIX Configuration
8
1
IIII
Perform a test print to make sure that the settings are correct.
# lpr -Pnp file_name
# lp -d np file_name
For more information about lpr and lp, see p.13 “Printing Method”.
Deleting the printer
To print using the lp or lpr command, the option specified when the installation
shell script is executed is used. Change the option in accordance with the work-
station you are using.
shell script is executed is used. Change the option in accordance with the work-
station you are using.
❖
❖
❖
❖ BSD UNIX workstation, Linux
Delete the printer entry from /etc/printcap, and then execute the installation
shell script again. Select options during the setup process.
Alternatively, search the printer entry from /etc/printcap, and change its rp
capability to option setting.
shell script again. Select options during the setup process.
Alternatively, search the printer entry from /etc/printcap, and change its rp
capability to option setting.
❖
❖
❖
❖ Solaris, HP-UX
Delete the printer entry, and then execute the installation shell script again.
Select options during the setup process. To delete the printer entry, follow the
procedure below:
Select options during the setup process. To delete the printer entry, follow the
procedure below:
A
Stop the scheduler.
# /usr/sbin/lpshut
B
Delete the printer.
# /usr/sbin/lpadmin -x printer_name
C
Restart the scheduler.
# /usr/lib/lpsched
After Executing the Installation Shell Script
The printing environment is set up automatically when the installation shell
script is executed.
This section describes setup contents when the installation shell script is execut-
ed under Red Hat Linux, Solaris, and HP-UX.
script is executed.
This section describes setup contents when the installation shell script is execut-
ed under Red Hat Linux, Solaris, and HP-UX.
Linux
❖
❖
❖
❖ Adding the IP address and host name to the /etc/hosts file
The following line is added to the /etc/hosts file. The IP address and printer
host name which you previously entered in the installation script will be
used:
192.168.15.16 nphost # Network Printer
host name which you previously entered in the installation script will be
used:
192.168.15.16 nphost # Network Printer
• 192.168.15.16 is the IP address, nphost is the host name, from # to the end
of the line is the comment.