Справочник Пользователя для Ricoh ap1400

Troubleshooting

108

Multiple pages are fed 
through the printer at once.

Clean the friction pad, if it is dirty.

Remove all paper from the tray and fan it gently to get 
air between the paper. After that, load it back into the 
tray.

Image is printed on the re-
verse side of the paper.

Set the paper upside down.

Paper misfeeds occur fre-
quently.

Check the paper size settings. The size specified with 
the paper size dial might be different from the actual 
paper size. Make the correct dial setting. 

Use the recommended paper. Avoid using curled, 
folded, or wrinkled paper, perforated paper, or glossy 
paper. 

Clean the paper feed roller, friction pad, and/or regis-
tration roller, if they are dirty. 

Operation panel error mes-
sage stays on after removing 
the misfed paper.

Open the front cover of your printer and then close it. 

Desired tray isn't used for the 
output.

Check the paper size settings. The size specified with 
the paper size dial might be different from the actual 
paper size. Make the correct dial setting. 

When using the bypass tray, specify the paper size us-
ing the operation panel. 

When you are using a Windows operating system, the 
printer driver settings overrides those specified using 
the operation panel. Specify the desired output tray us-
ing the printer driver. Refer to the driver's online help 
file.

The printed image is differ-
ent from the image in the 
computer.

When you use some features such as enlargement and 
reduction, the layout of the image might be different 
from those shown in the computer display.