Руководство Пользователя для Ricoh AP400

Appendix

140

❖

❖

❖

❖ When there are static IP addresses and addresses assigned by DHCP

• IP Address and subnet mask: If a static IP address is the same as an address

assigned by DHCP, or the static subnet mask address and the subnet mask
address assigned by DHCP overlap, the machine uses the static IP address
interface.

❒ The interface with the DHCP setting is set by default.

• Gateway Address: Operates with the address entered manually.

❒ If a static address is not selected, or is set to 0.0.0.0, the interface with the

address assigned by DHCP is used.

❒ Printers that register the printer NetBIOS name on a WINS server must be

configured for the WINS server. See p.117 “WINS”.

❒ Supported DHCP servers are Windows NT 4.0 Server Service Pack 4 or later,

Windows 2000, Windows XP Professional/Windows Server 2003 Server, and
NetWare 5/5.1, 6.

❒ If you do not use the WINS server, reserve the printer's IP address in the

DHCP server so that the same IP address is assigned every time.

❒ To use the WINS server, change the WINS server setting to “active” using the

control panel.

❒ Using the WINS server, you can configure the host name via the remote net-

work printer port.

❒ DHCP relay-agent is not supported. If you use DHCP relay-agent on a net-

work via an ISDN line, it will result in expensive line charges. This is because
your computer connects to the ISDN line whenever a packet is transferred
from the printer.

If the printer IP address is not assigned by a DHCP server automatically, a tem-
porary IP address starting with 169.254 which is not used on the network can be
selected automatically by the printer.

❒ The IP address assigned by the DHCP server is given priority to that selected

by AutoNet.

❒ You can confirm the current IP address on the configuration page. For more

information about the configuration page, see the Printer Reference.

❒ When AutoNet is running, the NetBIOS name is not registered on the WINS

server.

❒ The machine cannot communicate with devices that do not have the AutoNet

function.