Руководство Пользователя для Ricoh AP400

Windows 95/98/Me Configuration

Setting Up a Client Computer

This section describes the procedures for setting up a client on a network that
uses Windows 2000, Windows XP/Server 2003, Windows NT Server or Win-
dows NT Workstation as a print server.
When using a Windows 2000, Windows XP/Server 2003 or Windows NT print
server, select a shared printer on Windows 2000, Windows XP/Server 2003 or
Windows NT.

Limitation

❒ When using a print server connected to the printer with SmartNetMonitor for

Client, you cannot use Recovery Printing and Parallel Printing.

Note

❒ This section assumes that the client has already been configured to communi-

cate with a Windows 2000, Windows XP/Server 2003 or Windows NT print
server. Do not begin the following procedure until the client has been set up
and configured correctly.

AAAA

Install the printer driver as a local printer.

Reference
For more information about installing the printer driver, see the Setup
Guide.

Note

❒ Any port can be selected during the installation, however, LPT1 is recom-

mended.

BBBB

Click [Start], point to [Settings], and then click [Printers].

Windows 2000,
Windows XP/Server 2003 or
Windows NT 4.0 Print Server

Windows 95/98/Me