Руководство Пользователя для Ricoh AP400
Windows 2000 Configuration
34
2
Setting Up a Client Computer
This section describes the procedures for setting up a client in a network that
uses Windows 2000, Windows XP/Server 2003, Windows NT Server or Win-
dows NT Workstation as a print server.
When using a Windows 2000, Windows XP/Server 2003 or Windows NT print
server, select a shared printer on Windows 2000, Windows XP/Server 2003 or
Windows NT.
uses Windows 2000, Windows XP/Server 2003, Windows NT Server or Win-
dows NT Workstation as a print server.
When using a Windows 2000, Windows XP/Server 2003 or Windows NT print
server, select a shared printer on Windows 2000, Windows XP/Server 2003 or
Windows NT.
Limitation
❒ When using a print server connected to the printer with SmartNetMonitor for
Client, you cannot use Recovery Printing and Parallel Printing.
Note
❒ This section assumes that the client has already been configured to communi-
cate with a Windows 2000, Windows XP/Server 2003 or Windows NT print
server. Do not begin the following procedure until the client has been set up
and configured correctly.
server. Do not begin the following procedure until the client has been set up
and configured correctly.
Use the [Printers] window to set up the printer.
AAAA
Click [Start], point to [Settings] and then click [Printers].
BBBB
Double-click the [Add Printer] icon.
This launches the Add Printer Wizard.
This launches the Add Printer Wizard.
CCCC
Click [Next >].
DDDD
Click [Network printer], and then click [Next >].
EEEE
Click [Next >].
Windows 2000
Windows 2000,
Windows XP/Server 2003 or
Windows NT 4.0 Print Server
Windows XP/Server 2003 or
Windows NT 4.0 Print Server