Руководство Пользователя для Ricoh AP400
Windows NT 4.0 Configuration
54
4
Installing SmartNetMonitor for Client
Install SmartNetMonitor for Client from the CD-ROM labeled “Printer Drivers
and Utilities”. For more information about how to install, see the Setup Guide.
After the installation is complete, configure the printer port with SmartNetMon-
itor for Client. See p.55 “Setting Up the Printer Driver”.
and Utilities”. For more information about how to install, see the Setup Guide.
After the installation is complete, configure the printer port with SmartNetMon-
itor for Client. See p.55 “Setting Up the Printer Driver”.
Deleting the port
The following procedure allows you to delete the printer port. If you want to de-
lete the port which is currently used in Windows, switch the port to another such
as “FILE”, then delete it. For more information about SmartNetMonitor for Cli-
ent, see SmartNetMonitor for Client Help.
lete the port which is currently used in Windows, switch the port to another such
as “FILE”, then delete it. For more information about SmartNetMonitor for Cli-
ent, see SmartNetMonitor for Client Help.
AAAA
From the [Printers] window, click the icon of the printer which uses Smart-
NetMonitor for Client to print. On the [File] menu, click [Properties].
NetMonitor for Client to print. On the [File] menu, click [Properties].
BBBB
Click the [Ports] tab, and then make sure that the SmartNetMonitor for Cli-
ent port is shown in the [Print to the following port] box.
Remember the port name because this port should be deleted later.
ent port is shown in the [Print to the following port] box.
Remember the port name because this port should be deleted later.
CCCC
From the [Print to the following port] box, select [FILE].
DDDD
Click [Apply].
The port which is currently in use is changed.
The port which is currently in use is changed.
EEEE
Click [Delete Port].
FFFF
After the confirmation message appears, click [Yes].
The port is deleted.
The port is deleted.
GGGG
Click [OK] to close the printer properties.