Инструкции Пользователя для Breckwell P24FSA
FAILURE TO CLEAN AND MAINTAIN THIS UNIT AS INDICATED
CAN RESULT IN POOR PERFORMANCE AND SAFETY
HAZARDS. NEVER CLEAN WHEN HOT.
NOTE: Inspect burn pot periodically to see that holes have not
become plugged, if so, clean thoroughly.
CAN RESULT IN POOR PERFORMANCE AND SAFETY
HAZARDS. NEVER CLEAN WHEN HOT.
NOTE: Inspect burn pot periodically to see that holes have not
become plugged, if so, clean thoroughly.
ASH REMOVAL
Ashes should be placed in a metal container with a tight-fitting lid.
The closed container or ashes should be placed on a
noncombustible surface or on the ground, well away from all
combustible materials pending final disposal. If ashes are disposed
of by soil burial or otherwise locally dispersed, they should be
retained in the closed container until all cinders have thoroughly
cooled.
ASH DISPOSAL – FREESTANDING MODELS
The P24 Freestanding has an ash bin located below the firebox. To
remove ashes:
a.
Make sure fire is out and firebox is cool.
b.
Clean heat exchanger tubes (see “CLEANING” and Figure 22).
c.
Remove optional imitation log set, if in use. Remove burn pot
by grasping it and pulling straight out.
by grasping it and pulling straight out.
d.
Empty ashes from burn pot into the pedestal ash bin through in
the bottom of the firebox. Scrape burn pot with cleaning tool.
Make sure burnpot holes are not plugged.
the bottom of the firebox. Scrape burn pot with cleaning tool.
Make sure burnpot holes are not plugged.
e.
Scrape ash in firebox into the pedestal ash bin through in the
bottom of the firebox (see Figure 23) or vacuum to remove
ashes.
WARNING: Make sure ashes are cool to the touch before
bottom of the firebox (see Figure 23) or vacuum to remove
ashes.
WARNING: Make sure ashes are cool to the touch before
using a vacuum.
See “VACUUM USE”.
f.
Periodically remove and empty ash bin (see Figure 24) by
unscrewing the two knobs on the front of the pedestal below
the ash lip. Dispose of ashes properly. (See “ASH REMOVAL”
above)
unscrewing the two knobs on the front of the pedestal below
the ash lip. Dispose of ashes properly. (See “ASH REMOVAL”
above)
g.
Replace ash bin.
h.
Replace burn pot. Make sure it is level and pushed all the way
back in when it is reinstalled. If not reinstalled properly, the Hot
Rod will not work properly.
back in when it is reinstalled. If not reinstalled properly, the Hot
Rod will not work properly.
ASH DISPOSAL - INSERT
Remove ashes periodically as they fill the firebox. To remove ashes:
a.
Make sure fire is out and firebox is cool.
b.
Clean heat exchanger tubes (see “CLEANING” and Figure 22).
c.
Remove optional imitation log set, if in use. Remove burn pot
by grasping and pulling straight out.
by grasping and pulling straight out.
d.
Empty ashes from burn pot. Scrape burn pot with cleaning tool.
Make sure burnpot holes are not plugged.
Make sure burnpot holes are not plugged.
e.
Use small shovel or vacuum to remove ashes. WARNING:
Make sure ashes are cool to the touch before using a
vacuum. See “VACUUM USE”.
Make sure ashes are cool to the touch before using a
vacuum. See “VACUUM USE”.
f.
Replace burn pot. Make sure it is level and pushed all the way
back on. If not reinstalled properly, the Hot Rod will not work
properly.
back on. If not reinstalled properly, the Hot Rod will not work
properly.
MAINTENANCE
20
FIGURE 22
FIGURE 23
FIGURE 24