Справочник Пользователя для Haier hse02wncww
English
8
Interior Shelves
To remove or replace a full-width slide-out shelf: (see fig. # 4)
1. Gently tilt the shelf up and slide
1. Gently tilt the shelf up and slide
forward until the shelf has been completely
removed.
removed.
2. To replace the shelf, gently slide the shelf back.
Reversing Interior Shelf:
1. When storing a 2-Liter bottle in the door, the
Reversing Interior Shelf:
1. When storing a 2-Liter bottle in the door, the
shelf should be installed with the indent side
facing out and on the left
facing out and on the left
2. When not storing a 2-liter bottle in the door, the
shelf should be installed with the indent side facing in on the right side.
Dispense-A-Can™
The refrigerator has a convenient "Dispense-A-CanTM" storage
compartment. Simply stack cans vertically, loading from the top and drawing
them from the bottom.
compartment. Simply stack cans vertically, loading from the top and drawing
them from the bottom.
Defrosting Your Refrigerator
• For maximum energy efficiency, defrost freezer section whenever frost
accumulates to a thickness of 1/4" or more on freezer walls. Note that frost
tends to accumulate more during the summer months.
tends to accumulate more during the summer months.
• To defrost, remove the food and ice cube tray from the freezer section. Make
sure the drip tray is under the freezer
section and turn off the thermostat.
Defrosting may take a few hours.
section and turn off the thermostat.
Defrosting may take a few hours.
• While defrosting, water will accumulate
in the drip tray. The drip tray may also
need to be emptied during the defrost
process. Do not leave unattended. (see
Fig. 5)
need to be emptied during the defrost
process. Do not leave unattended. (see
Fig. 5)
• After defrosting, empty and wipe down
the drip tray, as well as the interior of
the refrigerator.
the refrigerator.
fig. 5
drip tray
fig. 4
8
English