Справочник Пользователя для Haier tom1003
Connection Instructions
VCR Setup
Connection and use steps:
1.Read the user guide supplied with your AV devices and ensure that it has
Composite or S-Video connectors;
2.Make sure that the power of the LCD-TV and the AV device are off;
1.Read the user guide supplied with your AV devices and ensure that it has
Composite or S-Video connectors;
2.Make sure that the power of the LCD-TV and the AV device are off;
s
- To avoid picture noise (interference), leave an adequate distance between the
VCR and TV
VCR and TV
VCR
1
2
17
Connection Option 1
Set the VCR to "TEST SIGNAL" and
tune the Tv to the Test Signal in
"Manual Tuning" mode. Store this on
Channel "0"
tune the Tv to the Test Signal in
"Manual Tuning" mode. Store this on
Channel "0"
Connection Option 2
1. Connect the audio and video cables
from the VCR's output jacks to the TV
input jacks, as shown in the figure.
When connecting the TV to VCR,
match the jack colors (Video = yellow,
Audio Left = white, and Audio Right =
red).
If you connect an S-VIDEO output from
VCR to the S-VIDEO input, the picture
quality is improved. Do NOT connect
the S-Video lead and the Yellow RCA
lead at the same time.
Scart Connection. This may also be
used for the VCR connection
from the VCR's output jacks to the TV
input jacks, as shown in the figure.
When connecting the TV to VCR,
match the jack colors (Video = yellow,
Audio Left = white, and Audio Right =
red).
If you connect an S-VIDEO output from
VCR to the S-VIDEO input, the picture
quality is improved. Do NOT connect
the S-Video lead and the Yellow RCA
lead at the same time.
Scart Connection. This may also be
used for the VCR connection
2. Turn on the power of the TV first ;
and then turn on the power of the AV
device;
and then turn on the power of the AV
device;
3 Insert a video tape into the VCR and
press PLAY on the VCR. (Refer to the
VCR owner s manual.)
4.Press the TV/AV button to set the
video input mode of the TV to either
SCART, S-VIDEO or AV mode.
press PLAY on the VCR. (Refer to the
VCR owner s manual.)
4.Press the TV/AV button to set the
video input mode of the TV to either
SCART, S-VIDEO or AV mode.
SCART
VCR