Справочник Пользователя для Nikon D70S

Follow these steps when using the built-in Speedlight with a CPU lens.

1

 Rotate the mode dial to the desired setting 

(

 10).  If 

, 

,  , or   mode is selected, 

proceed to Step 4 (

 98).  i-TTL Balanced Fill-

Flash for Digital SLR will be selected, and the 
built-in Speedlight will pop-up automatically 
when required.

2

 Choose a metering method.  In P,  S, and A 

modes, the metering method determines the 
type of fl ash control used (

 94); select matrix 

or center-weighted metering to activate i-TTL 
Balanced Fill-Flash for Digital SLR.  Standard i-
TTL Flash for Digital SLR is activated automati-
cally in mode M  and when spot metering is 
selected in modes P, S, and A.

3

 Press the 

  button.  The built-in Speedlight 

will pop up and begin charging.  When the 
Speedlight is fully charged, the fl ash-ready 
indicator will light.

The built-in Speedlight can not be raised and fi red manually in 

, 

, 

, and   

modes.  Once raised, the built-in Speedlight will only fi re when required for additional 
lighting.

Some lenses may block the red-eye reduction lamp, preventing the subject from seeing 
the lamp and interfering with red-eye reduction.

To save battery power when the Speedlight is not in use, return it to the closed position 
by pressing it lightly downward until the latch clicks into place.