Справочник Пользователя для Nikon D70S

Subject too dark.  Raise sensitivity (ISO equiv a len cy; 

 46).

Subject too bright.  Use optional Neutral Density (ND) fi lter.

To prevent moisture entering via the remote cord connector from damaging the cam-
era, keep the remote cord connector cover closed in wet or humid environments.

If the limits of the exposure metering system are exceeded, one of the following in di -
ca tors will be dis played in the control panel and viewfi nder:

Digital Vari-Program modes use the sRGB color space (

 59).

The self-timer and optional remote accessories can be used to operate the shutter 
remotely and prevent blur caused by camera shake.  At default settings, the self-
timer delays shutter release until about ten seconds after the shutter-release button 
is pressed (

 105).  The optional ML-L3 remote control offers instantaneous remote 

release and remote release with a two-second delay (

 107), while the optional MC-

DC1 remote cord can be used for remote release and features a shutter-release button 
lock (see the MC-DC1 instruction manual for details).

In addition to the settings available in 

  mode,  P,  S, 

A, and M  modes offer control over such settings as 
shutter speed and aperture, white balance, image op-
timization, and exposure compensation.  See “Taking 
Photographs” (

 35).

Provides natural balance between main subject and back-
ground in portraits taken under low light.  Lighting for por-
trait subject will seem natural even when fl ash is used.
• Tripod, self-timer (

 105), and / or optional ML-L3 remote 

control (

 107) or MC-DC1 remote cord (

 191) can be used to prevent 

blurring at slow shutter speeds.  At speeds slower than 1 s, use noise re-
duction to reduce mottling (

 133).

• Use 

 mode for night shots that do not include portrait subject.

• Flash set to slow sync.  Other modes can be selected (

 96).