Руководство По Работе для Frigidaire fdb736gfs5

4

1. Load dishwasher (See Preparing and Loading

Dishes).

2. Add detergent (See Dishwasher Dispenser &

Detergents).

3. Add rinse aid, if needed (See Rinse Aid).

4. Turn dial clockwise to select cycle (See Wash

Cycle Selections) or number of hours for delay
start.

5. Select desired energy OPTIONS (See Energy

Options). The indicator will show red when
selected.

6. If using DELAY START, go to step number 8.
7. Run hot water faucet nearest dishwasher until

water is hot. Turn water off.

8. To start, close door to latch.

This dishwasher does not sound like most
dishwashers—IT'S QUIETER.

The new Precision Wash System™ uses
energy efficient motors for the wash and
drain portions of the cycle you select. Each
cycle has a series of water fills and drains for
washing and rinsing dishes. As each cycle
begins, you may–or may not–hear the drain
motor.

The next sound you will hear is the
splashing water as it enters the tub. Then the
lower arm rotates and circulates water. This
is followed by a pause and a slightly different
sound as the middle arm sprays water. If you
listen closely, you will hear the change in
sound as the wash action switches from one
arm to the other.

Note: Cycle times are approximate and will
vary with options selected. Hot water is
necessary to activate dishwasher detergent
and melt fatty food soils. An automatic sensor
will check the incoming water temperature and,
if it is not hot enough, the timer will be delayed
for automatic water heating in the main wash of
all cycles. This happens even though HI-TEMP
WASH ON option has not been selected. When
HI-TEMP WASH ON is selected, an even
higher temperature will be quaranteed to
handle heavier soil loads.

(81 minutes) (2 washes, 4 rinses, dry)
(7.2 gallons) (6.0 imp. gallons) (27.3 liters)
For pots, pans, casseroles and dinnerware with
dried-on or baked-on soils:
•

Turn dial to POTS & PANS/HEAVY WASH.

•

Select HI-TEMP WASH ON option.

•

Select other desired OPTIONS.