Краткое Руководство По Установке для Frigidaire gleq332cas1

Скачать
Страница из 4
Energy Saving Tips
• Keep the lint screen clean and exhaust the dryer
correctly.
• Sort laundry properly and select proper
temperature and cycle settings. Choose the
Automatic Dry cycle whenever possible for
accurate drying time.
• Dry only full loads. Single items and small loads
usually take longer to dry.
• Avoid overloading, adding wet items to a partially
dry load, and overdrying.
• Dry one load after another to take advantage of a
warm dryer.
• Opening the door needlessly causes warm air to
escape, which prolongs drying time.
• If possible, use the dryer on low humidity days.
• Install the dryer in an area where the room temperature
is at least 45°F (7°C).
P/N 134099100   (0107)
• DAMP DRY - This setting is best for items you
wish to partially dry before hanging or ironing.
Select the temperature setting most suitable for
the load.
• COOL DOWN - If the dried load cannot be
removed promptly at the end of the cycle, the
cycle selector will automatically advance to the
COOL DOWN setting.  Unheated tumbling
continues for 20 minutes to help reduce wrinkling.
When the Cycle Signal is on, it will sound briefly
every 5 minutes as a reminder to remove the load.
Air Fluff Cycle
This cycle provides up to 30 minutes of tumbling
without heat.  Use AIR FLUFF to dry items
containing feathers or down, foam rubber, plastics,
or similarly textured, rubber-like materials, to
freshen clothing, pillows or blankets, or to dust
draperies.
Timed Dry Cycle
This cycle provides up to 90 minutes of drying time
at the temperature selection of your choice.
Automatic Dry Cycle
• TOWELS - This setting is best for towel loads.
Select the  HIGH HEAT temperature setting.
• REGULAR/WHITES - This setting is best for
cotton items.  Select the HIGH HEAT temperature
setting.
• DELICATES/PERM PRESS/COLORS - This
setting is best for delicate, knit, or perm press
items.  Select the  MEDIUM HEAT temperature
setting for permanent press items, the  MEDIUM-
LOW temperature setting for most knit items
(some models), or the LOW HEAT temperature
setting for delicate items.
• Occasionally a load may seem too damp or
overdried at the end of the cycle.  To increase
drying time for similar loads in the future, set the
cycle selector on the indicator line to the left of
the TOWELS, REGULAR/WHITES, or
DELICATES/PERM PRESS setting.  For loads
requiring less drying time, set the cycle selector
on the indicator line to the right.
Cycle Selection 
(continued)
20
AUTOMATIC DRY
REGULAR/WHITES
30
COOL DOWN
60
10
DELICATES/PERM PRESS/COLORS
TIMED DRY
OFF
DAMP DRY
START
AIR FLUFF
NO HEAT
70
30
40
50
80
90
20
10
TOWELS
TEMPERATURE
CYCLE SIGNAL
ON
PERM PRESS
MEDIUM HEAT
ON
OFF
REGULAR
HIGH HEAT
KNITS
MEDIUM-LOW HEAT
DELICATES
LOW HEAT
SOME MODELS
*
*
OFF
OFF
OFF