Инструкции По Установке для Frigidaire fas296p2a1
2
4. CHECK FOR ANYTHING THAT COULD BLOCK
AIRFLOW - check area outside of window for
things such as shrubs, trees, or awnings.
Inside, be sure furniture, drapes, or blinds will
not stop proper airflow.
AIRFLOW - check area outside of window for
things such as shrubs, trees, or awnings.
Inside, be sure furniture, drapes, or blinds will
not stop proper airflow.
3/4"Screws (10)
Top Channel(1)
End Cap &
Leveling Legs(2)
Leveling Legs(2)
Lock Washers(4)
1/4" Nuts(4)
Mounting
Brackets(2)
Angle
Brackets(2)
Brackets(2)
Angle
Brackets(2)
1-1/2"x1/4 Bolts(4)
Side Accordion RH(1)
Side Accordion LH(1)
Side Accordion LH(1)
Shutter Clamp(2)
Fig. 1A Installation Hardware Model 463AAC008BA
1/4"Screws (23)
Sash
Seal(1)
Seal(1)
Lock Washers(4)
1/4" Nuts(4)
1-1/2"x1/4 Bolts(4)
Installation Hardware
Gasket(10)
NOTE: Surplus screw(s) for spare use.
Widow
Foam (1)
Foam (1)
Double
Sided
Seal(1)
Sided
Seal(1)
5. Check the available electrical service - power
supply must be the same as that shown on the unit
serial nameplate. (See Owner's Guide for serial
plate location.) Power cord is 48'' long. Be sure
you have an outlet near. All models have a
3-prong service plug to provide proper service
and safe positive grounding. Do not change plug
in any way. Do not use an adapter plug or an
extension cord. If your present wall outlet does
not match your plug, call a qualified electrician to
make the needed change.
supply must be the same as that shown on the unit
serial nameplate. (See Owner's Guide for serial
plate location.) Power cord is 48'' long. Be sure
you have an outlet near. All models have a
3-prong service plug to provide proper service
and safe positive grounding. Do not change plug
in any way. Do not use an adapter plug or an
extension cord. If your present wall outlet does
not match your plug, call a qualified electrician to
make the needed change.
6. Carefully unpack air conditioner - remove all
packing material. Protect floor or carpet from
damage. Two people should be used to move and
install unit.
packing material. Protect floor or carpet from
damage. Two people should be used to move and
install unit.
Tools Required
Flat blade screwdriver
Tape measure
Adjustable wrench or pliers
Pencil
Spirit level
Socket wrenches
Phillips screwdriver
Power drill1/8” bit
Scissors
Tape measure
Adjustable wrench or pliers
Pencil
Spirit level
Socket wrenches
Phillips screwdriver
Power drill1/8” bit
Scissors
Do not, under any
circumstances, cut,
remove, or bypass
the grounding prong.
circumstances, cut,
remove, or bypass
the grounding prong.
Power supply cord
with 3-prong grounding
plug and current
detection device
with 3-prong grounding
plug and current
detection device
Grounding type wall
receptacle
receptacle
WARNING
WARNING
!
Avoid fire hazard or
electric shock. Do not use an extension
cord or an adaptor plug. Do not remove
any prong from the power cord.
electric shock. Do not use an extension
cord or an adaptor plug. Do not remove
any prong from the power cord.
Drain Plug(Only for 25K and 28K models)