Руководство Пользователя для Frigidaire fls26z2gk
19
BEFORE YOU CALL (CONTINUED)
PROBLEM CAUSE
CORRECTION
AUTOMATIC ICE MAKER (CONTINUED)
Ice maker is not making enough ice.
•
Ice maker is producing less ice
than you expect.
than you expect.
•
Freezer is not cold enough.
•
Household water line valve is
not completely open.
not completely open.
•
Check to see if water
dispenser is dispensing slower
than normal.
dispenser is dispensing slower
than normal.
•
Side mounted ice maker should produce 4 to 4.5 pounds
(approximately 4 quarts) of ice every 24 hours. A rear
mounted ice maker should produce 3 to 4 pounds
(approximately 3½ quarts) of ice every 24 hours.
(approximately 4 quarts) of ice every 24 hours. A rear
mounted ice maker should produce 3 to 4 pounds
(approximately 3½ quarts) of ice every 24 hours.
Extra Ice
option should produce 25% to 50% more ice every 24
hours.
hours.
•
See PROBLEM section TEMPERATURES ARE TOO
WARM.
WARM.
•
Turn on household water line valve.
•
If it is, replace the ice & water filter cartridge.
Ice maker will not stop making ice.
•
Ice maker wire signal arm is
being held down by some item
in the freezer.
being held down by some item
in the freezer.
•
Move item and release wire signal arm. Remove any ice
cubes that are frozen together over the wire signal arm.
cubes that are frozen together over the wire signal arm.
Ice cubes are freezing together.
•
Ice cubes are not being used
frequently enough.
frequently enough.
•
Ice cubes are hollow (partially
frozen cubes with water
inside).
frozen cubes with water
inside).
•
Freezer control is set too
warm.
warm.
•
Very little food in freezer.
•
Remove ice container and discard ice from container. Ice
maker will produce fresh supply.
maker will produce fresh supply.
•
The ice & water filter cartridge may be clogged. Replace
filter cartridge.
filter cartridge.
•
Set freezer control to colder setting. Allow 24 hours for
temperature to stabilize.
temperature to stabilize.
•
Add more food to freezer.
Ice has bad odor and taste.
•
Ice has picked up odor or
flavor from strong food stored
in refrigerator or freezer.
flavor from strong food stored
in refrigerator or freezer.
•
Water running to ice maker
has poor taste or odor.
has poor taste or odor.
•
Ice not used frequently enough.
•
Cover foods tightly. Discard stale ice. Ice maker will
produce fresh supply.
produce fresh supply.
•
Add filter to water supply line. Consult a water purifying
company.
company.
•
Discard stale ice.
ICE DISPENSER
Dispenser will not dispense ice.
•
Ice storage container is empty.
•
Freezer temperature is set too
warm.
warm.
•
Household water line valve is
not open.
not open.
•
Freezer door is not closed.
•
Ice dispensing arm has been
held in for more than 4-5
minutes.
held in for more than 4-5
minutes.
•
When the first supply of ice is dropped into the container,
the dispenser should operate.
the dispenser should operate.
•
Turn freezer control to a higher setting so that ice cubes
will be made. When first supply of ice is made, dispenser
should operate.
will be made. When first supply of ice is made, dispenser
should operate.
•
Open household water line valve. Allow sufficient time for
the ice to be made. When ice is made, the dispenser
should operate.
the ice to be made. When ice is made, the dispenser
should operate.
•
Ensure freezer door is closed.
•
Motor is overloaded. Motor overload protector will reset in
approximately 3 minutes. Ice can then be dispensed.
approximately 3 minutes. Ice can then be dispensed.
Ice dispenser is jammed.
•
Ice has melted and frozen
around auger due to infrequent
use, temperature fluctuations,
and/or power outages.
around auger due to infrequent
use, temperature fluctuations,
and/or power outages.
•
Ice cubes are jammed
between ice maker and back
of ice container.
between ice maker and back
of ice container.
•
Ice cubes are frozen together.
•
Ice cubes are hollow
(partially frozen cubes with
water inside).
(partially frozen cubes with
water inside).
•
Remove ice container, thaw, and empty the contents.
Clean container, wipe dry, and replace in proper position.
When new ice is made, dispenser should operate.
Clean container, wipe dry, and replace in proper position.
When new ice is made, dispenser should operate.
•
Remove ice cubes that are jamming the dispenser.
•
Use the dispenser often so that cubes do not freeze
together.
together.
•
The ice & water filter cartridge could be clogged. Replace
the filter cartridge. Dispensing system operates best at 30
– 100 psi water pressure. Well water pressures should fall
within this range.
the filter cartridge. Dispensing system operates best at 30
– 100 psi water pressure. Well water pressures should fall
within this range.