Справочник Пользователя для Logic Controls KB5000

11 

KB5000 User Manual Rev. 2 

For PS/2 versions: Connect the KB5000 to the PC with the special interface cable 
provided. Plug the standard PC keyboard to the female PS/2 connector on the interface 
cable and the male PS/2 connector to the computer. 
 
For USB versions: Connect the KB5000 to any USB port on the computer. 
 

Start the Programming Utility by double clicking on the “KBWN” short-cut icon or by 
going to Start→Programs→Logic Controls Utilities→KB5N (Folder)→KB5N. You 
may also double click the KB5N.EXE icon in the folder where the utility is installed. 
 

Select the appropriate communication port by selecting either “USB” or “PS/2” in the 
drop down menu. 
 

Depending on what model keyboard you have select from the Keyboard menu the 
LK8000, LK1600 or KB5000. 

 

A new template can be prepared by entering new contents for each key position. 
Alternatively, an old template can be brought into the utility for editing. (LOAD from a 
.TPL file, IMPORT from a .TXT file, or READ from the Keyboard). Modify properties of 
the keyboard in the Properties dialog if necessary. For the KB5000M or KB5000MU with 
the optional integrated magnetic stripe reader both keyboard and MSR programming 
data will be saved into a single template file. 
 

It is strongly advised that the template should be first saved into a .TPL template file for 
future reference and for programming multiple keyboards. Then, click 
Configuration→Write into KB on the Menu bar or click on the “Down Arrow” icon  

 on the toolbar to write the template into the keyboard.