Руководство Пользователя для Microtek mv500

• For Windows 98SE, check to see if “Camera Driver” has been

installed on your computer.
Go to the Windows Control Panel and double-click “Add/Remove

Programs”. If the DV camera driver does not appear in the list, you

must install the DV camera driver from the Microtek CD-ROM.

• Check if the DV camera is detected by your system.

1) Right-click the “My Computer” icon and click Properties. The

“System Properties” window appears.

2) Click the “Hardware” tab and then click the “Device Manager”

button. Expand the “Disk drives” tree; the removable disk drive

should be in the list.

A1: The “USB Switch” setting is set to the incorrect mode.

• Enter the Setup mode, and set USB Switch to “USB Mode”.

A2: The DV camera is disconnected to the computer.

• Make sure one end of the USB cable is connected to your computer

and the other end to your DV camera’s USB connector.

• Make sure the USB cable is properly connected to both the DV

camera and the computer.

A1: The “USB Switch” setting is set to the incorrect mode.

• Enter the Setup mode, set USB Switch to “Web Cam”.

A2: The DV camera is disconnected from the computer.

For Windows Users:

• Make sure one end of the USB cable is connected to your computer

and the other end to your DV camera’s USB connector, then turn on

the DV camera.

• Check to see if “Camera Driver” has been installed on your

computer.

Mac OS cannot find the newly

created drive icon (Take-it,

Take-it.SD) on the desktop.

The DV camera does not operate in

Web Cam mode.