Руководство Пользователя для Clover cdr-4010
- 5 -
4.
What to do at the time of installation
DVR
should be installed in the following order:
1. Make sure all the required hardware is available.
DVR
unit
Up to 4 cameras (including power source)
CCTV monitor (or TV set)
Network cable if connecting to a PC
2. Connect the cameras, the DVR unit and monitor (Refer to Fig 6-3).
3. Connect the AC power supply (SMPS) to the DVR.
4. Confirm live video is displayed on the monitor before going to the next step.
5. Select Set Menu and set current date and time. (Refer to 8.setting).
6. Run FACTORY DEFAULT menu on the SYSTEM menu.
7. Perform HDD formatting.
8. Escape from set Menu.
8. Escape from set Menu.
9. Set values for required options.
10. Network cable should be connected to the DVR unit before turning the power on.
Refer to Fig 6-7 for the cable specification.