Руководство По Установке для Nortel 4000
8-6
300275-D Rev. 00
Nautica Modules Installation Guide
Using the PRI Module
The North American PRI module uses several different switch
types. If you do not know your switch type, refer to your service
provider.
types. If you do not know your switch type, refer to your service
provider.
If you are using the 4ESS switch type, it is necessary to download
a different software image using the Device Configuration option
in Nautica Wizard. The software image can be found on the CD in
the \Upgrade\ISDNTA\PRI directory.
a different software image using the Device Configuration option
in Nautica Wizard. The software image can be found on the CD in
the \Upgrade\ISDNTA\PRI directory.
No switch type is required if you are using the E1 PRI module in
Europe as the software defaults to ETSI.
Europe as the software defaults to ETSI.
When using the PRI module outside Europe or North America it
may be necessary to download the country specific software to
the PRI module. The software files are listed in the ReadMe.txt
file on the CD in the \Upgrade\ISDNTA\PRI directory.
may be necessary to download the country specific software to
the PRI module. The software files are listed in the ReadMe.txt
file on the CD in the \Upgrade\ISDNTA\PRI directory.
For more information about Nautica Wizard and the BCC, refer to
the relevant online documentation.
the relevant online documentation.
Warning:
Do not connect the PRI module to the network until
you have configured the correct switch type using Nautica
Wizard or the BCC.
Wizard or the BCC.