Руководство По Установке для Nortel 4000
Additional Regulatory Information
300275-D Rev. 00
A-3
Les cables dans le cordon fourni sont colorisés suivant les codes:
Port Specifications
The ports in a Nautica 4000 are classified as follows:
Interconnection circuits should be such that the equipment
continues to comply with the requirement of section 6.2 for
Telecommunications Network Voltage (TNV) circuits and section
2.3 for Safety Extra Low Voltage (SELV) circuits of
EN60950:1992/A4:1997 after making connections between
circuits.
continues to comply with the requirement of section 6.2 for
Telecommunications Network Voltage (TNV) circuits and section
2.3 for Safety Extra Low Voltage (SELV) circuits of
EN60950:1992/A4:1997 after making connections between
circuits.
In order to maintain the independent approval for this module, it
is essential that, when other option modules are introduced which
use or generate hazardous voltages, the minimum creepage and
clearances specified in the table below are maintained between
the module and any other assemblies which use or generate a
voltage.
is essential that, when other option modules are introduced which
use or generate hazardous voltages, the minimum creepage and
clearances specified in the table below are maintained between
the module and any other assemblies which use or generate a
voltage.
Vert et Jaune
Terre
Bleu
Neutre
Marron
Phase
Port
Type
Location
LAN 10BASE-T
SELV
Chassis
LAN AUI
SELV
Chassis
Manager
SELV
Chassis
BRI
TNV1
Chassis
PRI
TNV1
Chassis
WAN
TNV (within the
limits of SELV)
limits of SELV)
Chassis
ISDN (J2)
TNV1
BRI-ST Module
Host (J1)
SELV
BRI-ST Module