Справочное Руководство для Nortel 2350
250 Configuring Wireless Parameters
NN47250-102 (320666-G Version 02.01)
To remove the mapping between the radio profile and a service profile, select the service profile in the Current Service
Profiles list. Click Remove to move the profile name to the Available Service Profiles list.
Profiles list. Click Remove to move the profile name to the Available Service Profiles list.
Radio Selection Tab
The Radio Selection Tab lists the radios managed by the radio profile. A radio can be managed by only one radio profile.
To add a radio to the radio profile, select the radio in the Available Members list. Click Add to move the radio to the
Current Members list.
Current Members list.
To remove a radio from the radio profile, select the radio in the Current Members list. Click Reset to Default to return
the radio to the default radio profile.
the radio to the default radio profile.
Voice Configuration Tab
The Voice Configuration tab lists settings for VoIP services:
•
QoS Mode—Classification and marking of high priority traffic on the WSS and AP:
•
WMM—Classifies, marks, and forwards traffic for Wi-Fi Multimedia (WMM) devices based
on 802.1p and DSCP values.
on 802.1p and DSCP values.
•
SVP—Optimizes forwarding of SpectraLink Voice Priority (SVP) traffic by setting the
random wait time an AP radio waits before transmitting the traffic to 0 microseconds.
random wait time an AP radio waits before transmitting the traffic to 0 microseconds.
Viewing and Changing the Auto-DAP Profile
You can use an Auto-DAP profile to deploy unconfigured Distributed APs. A Distributed AP that does not have a
configuration on a WSS can receive its configuration from the Auto-DAP profile instead.
configuration on a WSS can receive its configuration from the Auto-DAP profile instead.
The Auto-DAP profile assigns a Distributed AP number and name to the AP, from among the unused valid AP numbers
available on the switch. The Auto-DAP profile also configures the AP with the AP and radio parameter settings in the
profile. The AP and radio parameter settings in the Auto-DAP profile are configurable.
available on the switch. The Auto-DAP profile also configures the AP with the AP and radio parameter settings in the
profile. The AP and radio parameter settings in the Auto-DAP profile are configurable.
The Auto-DAP profile does not control SSIDs, encryption parameters, or any other parameters managed by service
profiles. You still need to configure a service profile separately for each SSID.
profiles. You still need to configure a service profile separately for each SSID.
A WSS can have one Auto-DAP profile.
Note. If the Available Members list is empty, no APs have been configured for the
switch yet. To configure APs , see
switch yet. To configure APs , see
and
. After you configure the
APs, return to this wizard page to apply the radio profile to radios.
Note. The SVP QoS mode also requires an ACL to mark CoS in the SVP traffic.
The ACL is automatically configured by WLAN Management Software when you
use the Voice Service Profile wizard with the SVP vendor option.
The ACL is automatically configured by WLAN Management Software when you
use the Voice Service Profile wizard with the SVP vendor option.