Руководство Пользователя для Nortel 4000
Managing Remote Access Concentrators Using Annex Manager
Appendix A RAC Parameters
A-10
CallDef_at_nodeid
specifies the Appletalk hint used by a RAC or an ISDN Primary Rate RAC . You
can enter an ID in decimal or hexadecimal notation. Each ID has two parts
separated by a dot:
can enter an ID in decimal or hexadecimal notation. Each ID has two parts
separated by a dot:
•
A network address ranges from 0 to 65534 (0x0000 to
0xFFFE).
0xFFFE).
•
A node address ranges from 0 to 255 (0x00 to 0xFE).
For example,
191.253
,
0x00BF.253
and
191.0xFD
designate the same address.
CallDef_at_security
turns on ACP service for an AppleTalk session. When you choose
enabled
for
this parameter and for
enable_security
, the ISDN Primary Rate RAC uses ACP to
get security information about the client, including authentication, logging, and
zone access information. If you choose
zone access information. If you choose
disabled
, the ISDN Primary Rate RAC
uses only local security.
CallDef_attn
_string
defines a control character sequence that returns users to the CLI prompt. Users
can define a Annex Managerrary control character sequence using the CLI
can define a Annex Managerrary control character sequence using the CLI
stty
attn
command.
Type
RAC
Values
0 to 65534.255
Default
0.0
Lists
RAC Only, AppleTalk, Call Defaults
Type
RAC
Values
enabled or disabled
Default
disabled
Lists
RAC Only, AppleTalk, Call Defaults
Type
RAC
Value
+ any character, up to 16 characters
Default
“ “ (null string) or
+
(for vcli connections)
Lists
RAC Only, Cmd LIne Editing, Modem, Modem Internal,
Call Defaults
Call Defaults
Ctrl
Ctrl
A