Руководство Пользователя для Nortel 4000
A-27
Appendix A RAC Parameters
Managing Remote Access Concentrators Using Annex Manager
CallDef_port_input_
flow_control
flow_control
specifies the method of flow control for input received through a connection.
You can enter:
You can enter:
•
none
to disable flow control.
•
xonXoff
to designate flow control by recognizing xon and xoff
characters.
•
hardware
to indicate that flow control is delegated to a lower
level.
CallDef_port_
multisession
multisession
enables two active windows on the DEC TD/SMP-supported(VT420 or VT330)
terminals that are dialed in to a RAC or an ISDN Primary Rate RAC. The feature
is available to all calls on which the VCI interface is configured.
terminals that are dialed in to a RAC or an ISDN Primary Rate RAC. The feature
is available to all calls on which the VCI interface is configured.
CallDef_port_password
defines a password for a RAC or an ISDN Primary Rate RAC call. You can use
this password as a back-up for host-based security if the security servers do not
respond, or as an additional line of security after you enter a user name and
password. For security reasons, Annex Manager displays this value as
this password as a back-up for host-based security if the security servers do not
respond, or as an additional line of security after you enter a user name and
password. For security reasons, Annex Manager displays this value as
set
or
unset
.
If you use SecurID, set
CallDef_port_password
to a null string
(" "). Refer to the Remote Access Concentrator Software Reference
for more information about SecureID.
for more information about SecureID.
Type
RAC
Values
none, xonXoff, hardware
Default
none
Lists
RAC Only, Flow Control, Modem, Call Defaults
Type
RAC
Values
enabled or disabled
Default
enabled
Lists
RAC Only, Call Defaults
Type
RAC
Values
0 to 15 characters
Default
unset
Lists
RAC Only, Modem, Modem Internal, Call Defaults, Synch
Call Defaults
Call Defaults