Руководство Пользователя для Nortel 4000
Managing Remote Access Concentrators Using Annex Manager
Appendix A RAC Parameters
A-76
ppp_acm
specifies which of the first 32 bytes (0x0 to 0x1F) of the ASCII character set can
be sent as clear text and which should be protocol-escaped.
be sent as clear text and which should be protocol-escaped.
ppp_ipx_network
defines a unique network number for an IPX PPP connection assigned to a
specific port. The number is negotiated when the IPX PPP connection is
established. If the number at one end is zero (0), the number at the other end is
used. You can enter an 8-digit hexadecimal number here.
specific port. The number is negotiated when the IPX PPP connection is
established. If the number at one end is zero (0), the number at the other end is
used. You can enter an 8-digit hexadecimal number here.
ppp_ipx_node
defines a unique node number for an IPX PPP connection assigned to a specific
port. You can enter a 12-digit hexadecimal number here, using dashes to separate
sets of two numbers (e.g., 00-00-00-00-00-00). You cannot use a number that
has 1 in the last bit of the first octet, since these numbers are reserved for multicast
addresses, or 0xFF-FF-FF-FF-FF-FF, which is reserved as a broadcast node
address.
port. You can enter a 12-digit hexadecimal number here, using dashes to separate
sets of two numbers (e.g., 00-00-00-00-00-00). You cannot use a number that
has 1 in the last bit of the first octet, since these numbers are reserved for multicast
addresses, or 0xFF-FF-FF-FF-FF-FF, which is reserved as a broadcast node
address.
ppp_mru
defines the maximum receive unit (MRU) that the RAC requests as its local MRU.
Type
Async
Values
8 character hexadecimal
Default
00000000
Lists
Async Port, PPP
Type
Async
Values
0x00000001 to 0xFFFFFFFF
Default
00000000
Lists
Async Port, PPP
Type
Async
Values
0x00-00-00-00-00-00 to 0xFF-FF-FF-FF-FF-FE
Default
00-00-00-00-00-00
Lists
Async Port, PPP
Type
Async
Values
64 to 1500
Default
1500
Lists
Async Port, PPP