Руководство Пользователя для Nortel 4000
A-93
Appendix A RAC Parameters
Managing Remote Access Concentrators Using Annex Manager
slip_no_icmp
discards ICMP packets directed to the SLIP link. This parameter allows the RAC
to reduce unnecessary traffic and messages over the SLIP link.
to reduce unnecessary traffic and messages over the SLIP link.
slip_ppp_security
controls dial-up SLIP/PPP access. When
enable_security
and
slip_ppp_security
are
set to
enabled
, ports configured for SLIP and PPP use the ACP security server.
The RAC determines whether CLI users are authorized to execute SLIP or PPP
commands.
commands.
slip_subnet_mask
contains the RAC IP subnet mask for a SLIP interface. The subnet mask defines
which portion of the IP address is the network, subnet, and host. The parameter
default is based on the network portion of the RAC IP address. Setting this
parameter incorrectly can cause routing problems.
which portion of the IP address is the network, subnet, and host. The parameter
default is based on the network portion of the RAC IP address. Setting this
parameter incorrectly can cause routing problems.
slip_tos
allows a RAC to send interactive traffic (such as
Telnet
,
rlogin
, and
ftp
control
sessions) before it sends other traffic. This parameter provides a type-of-service
based SLIP queuing.
based SLIP queuing.
Type
Async
Values
enabled or disabled
Default
disabled
Lists
Async Port, SLIP
Type
Async
Values
enabled or disabled
Default
disabled
Lists
Async Port, PPP, SLIP, Security
Type
Async
Values
IP address
Default
0.0.0.0
Lists
Async Port, SLIP
Type
Async
Values
enabled or disabled
Default
disabled
Lists
Async Port, SLIP