Инструкции По Установке для Nortel 100
*211487-A*
Preparing a drywall or a cement wall for mounting
To mount your Instant Internet 100-S on a drywall or cement wall, you must first prepare the wall.
To prepare a drywall or cement wall for mounting the Instant Internet 100-S unit:
1
Use a drill and a 1/4-inch (0.63~0.65 mm) drill bit to drill four 1 1/16-inch (27.0 mm) deep holes
where you marked the wall with the template.
where you marked the wall with the template.
2
Insert each of the plastic expansion lugs included with the unit into the four newly drilled holes.
3
Repeat steps 1 & 2 for the other mounting bracket.
Mounting the Instant Internet 100-S on a wall
To mount the Instant Internet 100-S on a wood wall or a prepared drywall or cement wall:
1
Place the bracket against the wall where you marked the wall with the template.
Align the holes in the bracket with the expansion lugs if you are mounting on a drywall or
cement wall.
cement wall.
2
Insert each of the four screws through the holes in the bracket and into the wood wall or the
expansion lugs.
expansion lugs.
To mount your Instant Internet 100-S on a wood wall, use only wood screws; do not use the
plastic expansion lugs.
plastic expansion lugs.
3
Screw in the screws.
4
Repeat steps 1, 2, & 3 for the other mounting bracket.
cement wall and for mounting the unit on the wall.
Figure 2 Components for mounting the BayStack Instant Internet 100-S unit on a wall
For more information on mounting your BayStack Instant Internet 100-S unit, refer to Setting Up the
BayStack Instant Internet 100-S Unit (part number 209374-A).
BayStack Instant Internet 100-S Unit (part number 209374-A).
LEGEND
1
Hole drilled in the wall
3
Wall mount bracket
2
Plastic expansion lug
4
Self-tapping drywall screw or #6 wood screw
10095EA
1
2
3
4