Инструкции По Установке для Nortel 100
86
Appendix B Workstation support
209226-B
7
Restart the workstation when prompted.
TCP/IP is added to the list of installed network components. You are now
ready to configure TCP/IP to work with your network.
ready to configure TCP/IP to work with your network.
Installing TCP/IP on a Windows 2000 workstation
To install TCP/IP on a Windows 2000 workstation:
1
From the Windows Start menu, choose Settings > Control Panel.
2
Double-click the Network and Dialup connection icon.
3
Double-click on the Local Area connection.
4
Click Properties.
5
In the Configuration tab, click on Install.
6
From the list of items to add, select Protocol.
7
Click Add.
8
Select Internet Protocol (TCP/IP).
9
Click OK.
10
Click Close.
Note:
By default, the DHCP option for obtaining an IP address is
enabled. If you are not using DHCP, go to “Configuring a workstation to
use Instant Internet as the gateway and DNS proxy” on page 89”.
use Instant Internet as the gateway and DNS proxy” on page 89”.