Инструкции По Установке для Nortel 100
Appendix B Workstation support
89
Installing the BayStack Instant Internet Management Software Version 7.11
4
Click Release.
The current IP address lease is broken and the IP address returns to 0.0.0.0.
5
Click Renew.
A new IP address is leased for the workstation and the IP Address is filled in
along with the default gateway (the Instant Internet unit’s client-side IP
address). To verify that the Instant Internet unit’s IP address is the DNS
server, click More Info.
along with the default gateway (the Instant Internet unit’s client-side IP
address). To verify that the Instant Internet unit’s IP address is the DNS
server, click More Info.
6
Click OK.
To force a Windows NT or Windows 2000 workstation to renew its IP address
lease:
lease:
1
From the Windows Start menu, choose Run.
The Run dialog box opens.
2
In the Open box, type
cmd
and click OK.
3
At the command prompt, enter the following command to break the current IP
address lease:
address lease:
ipconfig /release
4
At the command prompt, enter the following command to get a new IP
address lease:
address lease:
ipconfig /renew
5
At the command prompt, type
exit
.
Configuring a workstation to use Instant Internet as
the gateway and DNS proxy
the gateway and DNS proxy
If you plan to assign static addresses to each workstation, how you configure
TCP/IP depends on your network:
TCP/IP depends on your network:
•
In a simple network where Instant Internet is used as the gateway, the default
route (such as router, gateway, etc.) should be the IP address of the Instant
Internet unit. The DNS of your workstation should be assigned the IP address
of the Instant Internet unit’s client-side IP interface.
route (such as router, gateway, etc.) should be the IP address of the Instant
Internet unit. The DNS of your workstation should be assigned the IP address
of the Instant Internet unit’s client-side IP interface.