Руководство Пользователя для Nortel 1110

Nortel IP Phone 2001

DHCP (0-No, 1-Yes)

Default 0 (for No).

If you select 1 (1 for Yes), the VLAN
ID is configured automatically to
a value received from the DHCP
server.

You are not prompted for DHCP if
VLAN is not set to Auto (2-Au), or if
DHCP is not enabled.

VLANFILTER (0-No, 1-Yes)

Default 0 (0 for No).

You are not prompted for
VLANFILTER if VLAN is not
enabled.

Duplex? (0-Auto, 1-Full)

Default 0 (for Auto).

Ctrl pBits (0-7, 8-Au)

Default 8 (for Auto).
You are not prompted for Ctrl pBits
if 802.1Q is not enabled.

Media pBits (0-7, 8-Au)

Default 8 (for Auto).
You are not prompted for Media
pBits if 802.1Q is not enabled.

PCUntagAll? (0-N, 1-Y)

Default 0 (for No).

PSK SRTP? (0 for No, 1 for Yes)

Default 0 (for No).

GARP Ignore? (0-No,1-Yes)

Default 0 (for No).

The IP Phone 2001 supports remote firmware upgrades through a
TFTP process and an automated UFTP process.

You are prompted to enter the TFTP Server IP address if you are
using a TFTP Server to download the current firmware.

The method to upgrade the firmware depends on the following Call
Server software:

•

For Succession Release 3.0 or CS 1000 Release 4.0, the TFTP
Server is required to download the current firmware. Enter the
TFTP Server IP address at the prompt.

•

For CS 1000 Release 4.5 and later, use either a TFTP Server to
upgrade the firmware (at the prompt accept the default entry of
0.0.0.0) or UFTP to download the current firmware.

•

For CS 1000 Release 5.0, a Signaling Server provides the
firmware for the IP Phones. Check the Nortel Web site at

www.nortel.com

for updated firmware files.

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368

02.01

Standard

Release 5.0

7 December 2007