Руководство Пользователя для Nortel 1110

Скачать
Страница из 632
Page 606 of 630
Appendix H: TFTP Server
553-3001-368 Standard 26.00 August 2007
TFTP Server planning
The TFTP Server holds the firmware for updating the IP Phones. Assuming 
the IP address for the TFTP Server has been configured on the IP Phone, each 
time the IP Phone is powered on, rebooted, or is manually reset, the IP Phone 
checks the version of firmware against the version of firmware on the TFTP 
Server. If the versions are different, the IP Phone downloads the new 
firmware from the TFTP Server. 
The following information must be considered when planning for a TFTP 
Server:
The process for the IP Phone to check the version of firmware against the 
firmware on the TFTP Server takes a few seconds for a quiet network.
The IP Phone attempts to connect to the TFTP Server. If the TFTP Server 
is offline, unreachable, or no connection is made, the IP Phone uses its 
existing version.
The firmware downloading process takes about 30 seconds.
The TFTP Server must be capable of supporting multiple TFTP sessions.
When the IP Phone makes a TFTP request, it uses filenames without a 
full path name. Therefore, firmware updates for the IP Phones must be 
installed on the root directory of the TFTP Server.
When the firmware is uploaded to the TFTP Server, the files must be 
unzipped. Allow time for the TFTP Server to refresh. Monitor the TFTP 
Server for any errors. The TFTP Server can be located anywhere on the 
network if the IP Phones have the subnet mask and default IP gateway 
configured correctly. However, the IP Phone expects a response within two 
seconds to any TFTP Server request. Therefore, the TFTP Server should not 
be located, for example, at the other end of a slow WAN link.
CAUTION
TFTP firmware download does not work when the 
IP Audio Conference Phone 2033 is behind a NAT Server.