Руководство По Работе для Lowrance 1000
106
Press
↓ or ↑ to highlight the section you wish to change, then press
ENT
. Press
EXIT
to erase this menu.
Units of Measure
This menu (shown below) sets the speed and distance (statute, nautical
miles, meters), depth (feet, fathoms, or meters), temperature (degrees
Fahrenheit or Celsius) and heading (true or magnetic) units. To change
the units, you first press
miles, meters), depth (feet, fathoms, or meters), temperature (degrees
Fahrenheit or Celsius) and heading (true or magnetic) units. To change
the units, you first press
MENU
|
MENU
|
↓ to
S
YSTEM
S
ETUP
|
ENT
|
ENT
.
System Setup menu, left, Units of Measure Menu, right.
To set Speed/Distance Unit of Measure: Press
ENT
. Press
↑ or ↓ to
change the Speed/Distance, then press
ENT
. After the option is set,
press
EXIT
|
EXIT
to return to the page display.
To set Heading: Press
↓ to
H
EADING
|
ENT
. Press
↑ or ↓ to change the
heading, then press
ENT
. After the option is set, press
EXIT
|
EXIT
to re-
turn to the page display.
To set Depth: Press
→ to
D
EPTH
|
ENT
. Press
↑ or ↓ to change the depth
units, then press
ENT
. After the option is set, press
EXIT
|
EXIT
to return
to the page display.
To set Temperature: Press
→|↓ to
T
EMPERATURE
|
ENT
. Press
↑ or ↓ to
change the temperature units, then press
ENT
. After the option is set,
press
EXIT
|
EXIT
to return to the page display.
Obstruction Mode determines how AirMap displays the height of ob-
structions on the Map Page. If you change it to AGL (Above Ground
Level), then the Map Page will show an obstruction's height above the
surrounding terrain. If you set it on MSL (Mean Sea Level), the Map
Page will show the obstruction's altitude above sea level. Note that this
setting affects only the height of obstructions displayed on the Map Page.
structions on the Map Page. If you change it to AGL (Above Ground
Level), then the Map Page will show an obstruction's height above the
surrounding terrain. If you set it on MSL (Mean Sea Level), the Map
Page will show the obstruction's altitude above sea level. Note that this
setting affects only the height of obstructions displayed on the Map Page.