Руководство По Работе для Lowrance 5200c

 

130 

You shouldn't need this command if you are connecting your unit to a 

network with similar display units and/or a series of electronic probes.  

The Restore Defaults command allows you to reset an individual EP-10 

Fuel Flow Sensor's settings to factory defaults. If, for example, you exe-

cute the Restore Defaults command from your Port Fuel Flow Ad-

vanced Options menu, only the settings for the Port Fuel Flow will be 

reset to factory defaults. Other fuel flows on the network will not be 

affected. 

1. Press 

, use 

↑ ↓  to select 

 and press 

. The 

NMEA 2000 menu will appear with five options: Bus Setup, Fuel Man-

agement, NMEA 2000 Alarms, Waypoint Sharing and Backlight Syn-

chronization.  
2. Highlight 

 and press 

, which will open the Bus Configu-

ration menu. A list of network devices will be at the top of the page.  
3. Use 

↑  ↓ to select the desired fuel flow and press 

. The Device 

Configuration menu will appear.  
4. Highlight 

 and press 

.  

5. Select 

 and press 

. The following message will 

appear: Are you sure you wish to change this device's configuration?  
6. Highlight 

 and press 

. Press 

 repeatedly to get back to the 

main display. 
EP-15 Fluid Level Configuration 

1. Press 

, use 

↑ ↓ to select 

 and press 

. The 

NMEA 2000 menu will appear with five options: Bus Setup, Fuel Man-

agement, NMEA 2000 Alarms, Waypoint Sharing and Backlight Syn-

chronization.  
2. Highlight 

 and press 

, which will open the Bus Configu-

ration menu. A list of network devices will be at the top of the page.  
3. Select a fluid level you want to rename and press 

. The Device 

Configuration menu will appear with the Device Name dialog box high-

lighted. 
4. Press 

and use 

↑ ↓, ← → to input the desired name for the fluid 

level. Press 

. Press 

 repeatedly to get back to the main dis-

play.