Руководство По Работе для Lowrance 5300c igps

105 

  

 

To Delete all Trails 
1. Press 

|

, select 

 and press 

.  

2. Highlight 

 and press 

. The following Warning will ap-

pear: Delete All Trails?  
3. Select 

 and press 

. You will be returned to the Trails screen, 

where all trails have been deleted.  
4. Press 

 repeatedly to return to the map display. 

Update Trail Option 
The Update Trail menu allows you to change the way trail updates oc-

cur. There are three options: Auto, Time and Distance.  
In automatic mode, the unit does not update the plot trail while you are 

traveling in a straight line. When you deviate from a straight line, the 

unit places a plot point onto the trail. This conserves plot trail points. If 

a plot trail uses all of the available points allotted to it, the beginning 

points are deleted and replaced by points at the end of the trail. 
Selecting Time as the method for updating a trail will automatically 

place trail points at a duration of your choosing. You can set the unit to 

place trail points placed at any duration between 1 second to 9999 sec-

onds. The default setting is 3 seconds. Updating a trail by Distance will 

place trail points when you move a distance of your choosing. You can 

have trail points placed at any distance between 0.01 mile/nm/km to 

9.99 mile/nm/km. The default setting is 0.10 mi. 
WARNING: 

If you uncheck the Update Trail option, automatic trail 
creation and recording will be turned off. You must turn 
it back on to record trails. The default setting is on.