Справочник Пользователя для Akai pdp4273m1
4
Hold the power connector when removing the power cable:
Pulling the power cable itself may damage the wires inside the cable
and cause fire or electric shock.
Do not touch the connector with wet hands:
To avoid risk of electric shock.
Insert batteries in accordance with instructions:
Insert the batteries with correct polarities (positive and negative ).
Incorrect polarities may cause breakage and leakage of the
batteries, hurt operators and contaminate the remote controller.
Do not block or cover the vents:
Blocking the vents may cause overheating and fire. Do not install the
product in a place with little or no ventilation. Never cover the vents
with towels, blankets or dusters.
Unplug the connector:
Unplug the power connector when the product will not be used
for a long time.
ATTENTION
Unplug the connector
Image Sticking:
The plasma monitor illuminates phosphor to display images. The phosphor has a finite
illumination life. After extended periods of illumination, the brightness of the phosphor
will be degraded to such extent that stationary images would burn-in that part of the
screen as grayed-out images.
Tips to prevent such image sticking are:
- Do not display static images of high contrast and high brightness for long periods.
Use of video games and computers on this product may promote burn in of images
on the screen. Many portions of video game play and computer desktops do not
refresh and will contribute to this problem.
- Do not leave stationary images appearing for long, but try to refresh them at
appropriate intervals of time, or try to move them using screen saver function.
- Turn down the contrast and brightness control.
Note:
Such “Image Sticking” constitute misuse are NOT COVERED by the manufacturer’s
warranty.
Others:
This product is designed for indoor use only and is not suitable for out door use.
The operation temperature is 5°C ~ 33°C.
Unplug the connector