Справочник Пользователя для Extreme summitpx1

Px Series Application Switch Installation and Configuration Guide

10-3

Showing Configuration Details

Table 10-2 lists the commands that are used to display configuration information.

Table 10-2: Configuration Display Commands

show banner

Displays the current startup banner message.

show config

Displays the complete configuration to the screen.

show cookie

Displays the current status of cookie processing. It is 
disabled if no cookie processing is configured.

show default-gateway

Displays the default gateway IP address for the Gigabit 
Ethernet interface.

show dns-client

Displays the domain name service (DNS) default domain and 
the DNS server.

show gatewaymode [config]

Displays the current gateway mode.

show gslb [config]

Displays the activities of the GlobalPx Content Director 
agent. 

show healthcheck [config 
| down | summary | 
details | verbose]

Displays the current health check configuration.

show iparp

Displays the current layer 2 ARP table entries.

show iproute

Displays the layer 3 forwarding database. 

show natmode config

Displays the currently configured NAT mode.

show proxy-ip

Displays the currently configured proxy IP addresses.

show snmp

Displays the current SNMP configuration.

show sticky [config]

Displays which stickiness modes have been configured, and 
the configured timer values.

show switch

Displays the current version of software loaded in primary 
and secondary flash, MAC addresses, and other useful 
information.

show system-ip

Displays the IP address of the Gigabit Ethernet interface, 
along with its netmask.

show timeout

Displays the TCP/IP timer settings.

show vlan

Displays if VLAN support is enabled or not.

show vrrp [details | 
autosync | config]

Displays the current state of VRRP, including who is the 
master and what the priorities are of each system.