Справочное Руководство для Intermec 6100
SECTION 4
Power Management
PEN*KEY
R
6100 Computer Programmer’s Reference Guide 4-5
Table 4Ć3
Power States (PC Card)
Power State Description
READY
READY
PC Card is in the fullĆpower state
STANDBY
PC Card is in softwareĆactivated hardware suspend state
SUSPEND
PC Card is in softwareĆactivated hardware suspend state
OFF
PC Card is in softwareĆactivated hardware suspend state
Table 4Ć4
Power States (Serial Port)
Power State Description
READY
READY
If either RSĆ232 or RSĆ485 is enabled, the UART CLOCK is enabled.
If RSĆ232 is enabled, the RSĆ232 transceiver is enabled.
If RSĆ232 is enabled, the RSĆ232 transceiver is enabled.
STANDBY
If both RSĆ232 and RSĆ485 are disabled, the UART CLOCK is turned
off. If RSĆ232 is off, the RSĆ232 transceiver is turned off.
off. If RSĆ232 is off, the RSĆ232 transceiver is turned off.
SUSPEND
Same as STANDBY
OFF
Same as STANDBY
Table 4Ć5
Power States (Digitizer)
Power State Description
READY
READY
The digitizer is placed in its fullĆpower state.
STANDBY
The digitizer is placed in hardware suspend state
SUSPEND
Same as STANDBY
OFF
Same as STANDBY
Table 4Ć6
Power States (Pod)
Power State Description
READY
READY
Voltage is distributed to the POD.
STANDBY
(not defined)
SUSPEND
(not defined)
OFF
Voltage is removed from the POD
Table 4Ć7
Power States (PC Card Slot)
Power State Description
READY
READY
Power is routed to the slot
STANDBY
(not defined)
SUSPEND
(not defined)
OFF
Power is removed from the slot
4. Power Management