Справочное Руководство для Intermec 9710
Compaq/PS-2 Series
C d 39
8
Compaq/PS-2 Series
This section covers these workstations:
• AT&T 6386SX
• PS/2 50Z
• AT&T 6386WGS
• PS/2 55SZ
• Compaq 286/e
• PS/2 60
• Compaq 386/s
• PS/2 70
• Compaq 386/20e
• PS/2 80
• Compaq 386/33
• PS/2 90
• Compaq 486
• PS/2 95
• PS/2 25
• Tandy 2500
• PS/2 30
• Tandy 4016
• PS/2 50
• Tandy 5000
Cables
Connecting the reader to one of these workstations requires two cables: a keyboard
cable and a terminal cable. The interface kit contains both the keyboard and terminal
cables. If you need to order a replacement cable, use the part numbers listed below:
cable and a terminal cable. The interface kit contains both the keyboard and terminal
cables. If you need to order a replacement cable, use the part numbers listed below:
• Wedge interface kit (P/N 056944)
• Keyboard cable (P/N 054140)
• Terminal cable (P/N 056311)
• Adapter (P/N 056943)
• Keyboard cable (P/N 054140)
• Terminal cable (P/N 056311)
• Adapter (P/N 056943)
Power Supply
The reader does not require an external power supply to work with these workstations.
Set the PCB jumper to connect pins 1 and 2 on the reader’s rear panel.
Set the PCB jumper to connect pins 1 and 2 on the reader’s rear panel.