Справочное Руководство для Intermec 1800
Symbologies—Activation
142
SP/XX/RM/10/E/960401
Symbologies—Activation
To optimize the performance of your ScanPlus and to ensure trouble-free scanning,
do not select symbologies that you do not need.
do not select symbologies that you do not need.
The Disable All Symbologies code deactivates all the symbologies activated. If you want to
deactivate individual symbologies, use the Not Active codes for each symbology.
deactivate individual symbologies, use the Not Active codes for each symbology.
Disable All Symbologies does not reset the individual parameter settings for each
symbology. When you reactivate a symbology, you recover the parameter settings stored in
memory for that symbology when it was disabled.
symbology. When you reactivate a symbology, you recover the parameter settings stored in
memory for that symbology when it was disabled.
If you want to reset all the individual symbology parameters to their factory default values,
you must scan the Reset Factory Defaults bar code (
you must scan the Reset Factory Defaults bar code (
Ð
Reset all configuration parameters
).
The symbology activation codes are also provided with the parameters for each
symbology (
symbology (
Ð
appropriate
Symbologies
section for your symbology).
Codablock
Select the desired Codablock format and scan Codablock—Active to enable.
Codablock—Active
Codablock—Not Active (*)
(only available ScanPlus XP / PDF)
Codablock F (*)
Codablock A
Disable All Symbologies