Справочное Руководство для Intermec 1800

188  

SP/XX/RM/10/E/960401

action (

Ð

refer to)

no beeps or green indicator
LED during reading,
no transmission

• 

installation problem

check ScanPlus power supply,
connections (

Connection diagram for

your interface), product components

• 

configuration problem

• 

check you have the correct
product components (ScanPlus
model, cables, CMM, external
power supply as applicable)

• 

check you have the correct
number of flashes for your
interface at power-up (

Interfaces)

• 

reselect correct interface number
for your system if necessary
(

Predefined interface numbers

section for your interface,
Compose interface number)

• 

if you have just configured the
ScanPlus, make sure you have
finished correctly—the ScanPlus
may be waiting for an End
Selection for example

• 

symbology not selected

activate the required symbology
(

Symbologies—Activation)

• 

symbology not supported by your
ScanPlus model

see the user’s leaflet (if available) for
your ScanPlus model, read the
appropriate test code (

Test codes)

• 

good read beep / LED deactivated activate if required (Beeps / green

indicator LED)

• 

barcode length incompatible with
ScanPlus configuration
(minimum/fixed length parameter
settings)

• 

check bar code

• 

change barcode length setting for
your symbology (

Symbologies)

• 

ScanPlus configured for check
digit and no check digit present in
code

• 

check bar code

• 

change check digit configuration
for your symbology if applicable
(

Symbologies)

• 

you have read a pushbutton
activation code with a non-
pushbutton ScanPlus model

perform the global reset procedure
provided at the beginning of this
section (

Troubleshooting - Before you

contact your UBI representative . . .)