Справочное Руководство для Intermec 1800
Data decoding security parameters
SP/XX/RM/10/E/960401
37
Time-out between different consecutive codes
By default, you can read two different codes immediately one after the other—there is no
time-out between reads.
time-out between reads.
No Time-Out Between Different Consecutive Codes (*)
Compose timeout between different consecutive codes
Increasing the timeout before you can read a different code protects against unwanted
reading of other bar codes if they are close together on the same label.
reading of other bar codes if they are close together on the same label.
This time-out should not be longer than the Timeout Between Identical Consecutive
Codes.
Codes.
Compose Timeout Between Different Consecutive Codes
(maximum time-out = 2550 ms)
(maximum time-out = 2550 ms)
Example
To make your ScanPlus wait 1 second (= 1000 ms) before it can read a
different code:
different code:
1. Scan Compose Timeout Between Different Consecutive Codes.
2. Scan 1
0
0
0
then scan End Selection (
Ð
Number codes
or
inside back cover of this manual).