Руководство По Установке для Citel 4000
Accessing the Phone Set Interface
How to access
the telephone-
set interface
the telephone-
set interface
If a connection is already established and the telephone is operational, press the
Hold
Hold
key four times and press ‘2’ to disconnect. Press the Hold key an additional
four times to start the telephone-set interface. (See the flowchart on page 14.). The
message “Press ‘1’ to Connect” appears in the display.
message “Press ‘1’ to Connect” appears in the display.
Menu Log
Navigate through the telephone-set interface using the dialpad on the telephone. The
menu legend shows each applicable dial key and the its corresponding screen or
command within the interface. (See Figure 4, below.)
IMPORTANT NOTE
menu legend shows each applicable dial key and the its corresponding screen or
command within the interface. (See Figure 4, below.)
IMPORTANT NOTE
:
If a function key is not pressed for 30 seconds, the module automatically returns to the
first display, “Press ‘1’ to Connect”.
1
first display, “Press ‘1’ to Connect”.
1
: (Prv) Press to move backward through the menus. (Moves left or up in chart.)
2
: (Ok) Press to select the displayed option AND means Ok. (Moves right in chart.)
3
: (Nxt) Press to move forward through the menus. In the Address Mode sub-menu, use
this key to scroll down the list of available address modes. (Moves down in chart.)
No
No
: Press to quit the current menu and return to the previous menu without making a
change. (Some screens use this feature for enabling or disabling an
option.)
option.)
EXTender 4000 Universal Quick Installation Guide
14