Руководство Пользователя для Citel 1100

 Guide 

There is one more Recommend connect parameter to configure.  The User ID is required 
for all 1100A connections.  The default Remote User ID is not configured so on each 
connection the user would be prompted to enter the desired User ID.  If the User ID is 
configured then the remote User will not be prompted each connection.  The User ID can 
be configured using the Setup Wizard or the MC. 

 Remote->Utilities->Setup_Wizard 

 Remote->Configuration->Port 

You can also configure Modem setting using the TMI 

 (Remote Only)->Set Config->Connect Menu-> User ID 

 

 

5. Setting 

the 

  A User ID “maps” a specific port on the Remote Module to a 

specific port on the Switch Module. When connecting to the 1100A Switch you require 
a User ID.  The default ID is 1 (representing the port number).  This feature is also 
typically used when connecting to one of Citel’s multi-user devices such as a 
PBXgateway. If this remote is connecting to a multi-user device refer to the System 
Administrator’s Guide

 of the PBXgateway for more information.