Руководство Пользователя для Citel 1100

 Guide 

errors in the duty cycle of the signaling wave form. This setting can be adjusted from 0 
to 7. Some experimentation may be required to eliminate any audio issues that may 
arise. 

6. Enabling 

 (Nortel Norstar PBX only) in the Phone Features 

menu – If the user is monitoring another station for call activity this should be set to 
Enabled. 

Configuring the Modem Settings – Set the Modem settings for connection to the Switch 
Module from the Remote Module: 

 Remote->Configuration->Connect 

 

Modem Settings configuration may require changing from salue based on Line type, 
Line conditions and specific connection requirements. 

a)  Max Connect Rate – The Switch and Remote Module communicate by 

transmitting signals between the switch location and the remote location over an 
analog phone line. When set to Auto the first attempt at connecting will be at 
21600 bps which provides the most stable voice environment. If required, the 
connect rate can be set to 33.6Kbps, 31.2Kbps, 28.8Kbps, 26.4Kbps, 24Kbps, 
21.6Kbps, 19.2Kbps and 16.8Kbps.  If having connection problems try a lower 
rate than 21600 bps. 

b)  Leased Line – An analog leased line is a telephone line type offered by the 

telephone service provider (CO) and would be a dedicated line between the 
Switch and Remote Module (not a “dialup” connection). A standard analog line is 
the default setting. 

c)  Pulse Dialing – An older type of analog line that was used with the rotary dialing 

phone type. The default is Tone dialing. 

d)  Init String – The Switch and Remote Module initialization string is based on the 

standard modem AT Command set. Any AT commands can be added to comply 
with any corporate standards or requirements.