Руководство Пользователя для LiteOn dd-a100x
28
• You may not be able to record a program from TV or
from another device connected to this recorder, if the
source material is copy-protected (e.g. set in ‘Copy-
Once’ or ‘Copy-Never’ modes).
• You CANNOT record/copy a rented or purchased video/
disc from another device (video cassette recorder, DVD
player, DVD recorder, etc.) connected to this recorder.
• This DVD recorder adopts the DVD+VR recording
format, which enjoys a relatively greater compatibility.
However, it is still likely that recordings made with this
recorder may not be able to be played back on other
DVD recorders or DVD players.
Recording: Step by Step
Follow the steps to start your first recording.
Step 1.
Correctly connect all the cables
Connecting up Your DVD Recorder (p.11)
Step 2.
Choose a recordable disc with enough
space
Check the disc types supported by the DVD recorder you
are using.
Model Comparison Chart (back cover)
Discs Types Supported (p.6)
Recording Mode (p.46)
Step 3.
Prepare the disc
If the DVD recorder you are using supports recording on
minus (-) DVD discs, and you use blank DVD-RW discs to
minus (-) DVD discs, and you use blank DVD-RW discs to
record, you will need to format the discs before recording.
Pressto select ‘Quick Preparation’ or ‘Full Prepara-
tion’, then press ENTER.
Recording_01_03
Step 4.
Start recording
For Example, to record from TV, you need to select a
channel first. Press TV(MODE) to select ‘TV’ as the
signal source. then press CH and CH to select a
desired channel.
Recording_01_02
You can select a channel by pressing number buttons (0-
9) and ENTER. (For Channel 6, press 6, then ENTER.
For Channel 55, press 5, 5 and ENTER.)
Press RECORD to start recording.
Press RECORD to start recording.
To pause recording, press PAUSE/STEP.
For recording from other source, see the rest part of this
For recording from other source, see the rest part of this
chapter.
Step 5.
Stop recording
Press STOP to stop the recording. To start another
recording session, press RECORD again after the
previous recording is stopped.
Each new recording session is placed after the previous
Each new recording session is placed after the previous
session unless a certain recording title is set to be over-
written.
Overwriting a Title (p.41)
Step 6.
Finalize the disc
For DVD+R. DVD-R and DVD-RW(formatted in ‘Quick
Preparation’ mode), finalization is a necessary step if you
want the discs to be played back on other compatible
devices. Use the ‘Disc Tool’ in ‘Easy Guider’ to complete
the process.
Using Easy Guider: Disc Tools (p.25)
You need to complete the channel scanning process
before recording from TV..
Setting TV Channels (p.18)
Before recording, you can set the recording mode
through RecordingRecording Mode in the Setup
menu.
Recording Mode (p.46)
Recording