Техническое Руководство для Peavey sa 4200
Controls
Front: 4 channel input signal attenuators, AC switch
Rear:
Rear:
2 output mode switches; Ch A & B bridge switch; HPF switches;
AUTODELAY™ bypass switches; AUTODELAY setup switches
Indicator LEDs
Front:
Front:
4 Clip, 4 Signal, 1 Power
Rear:
AUTODELAY setup
Protection
Over-Temperature, DC, turn on/off transients, subsonic, incorrect load, short-circuit
Connectors
Input:
Input:
Four female XLRs - LINE INPUTS
One female XLR - TEST MICROPHONE
Output: Two 4-position barrier strips - SPEAKER OUTPUTS
One male XLR - REFERENCE OUTPUT
Construction
16 gauge steel reinforced with 12 gauge rack ears
Dimensions
Height: 3.50” (8.84 cm) 2 EIA rack spaces
Height: 3.50” (8.84 cm) 2 EIA rack spaces
Width, front: 19.00” (48.26 cm)
Width, rear: 17.00” (43.18 cm)
Width, rear: 17.00” (43.18 cm)
Overall depth: 17.05” (43.31 cm)
Mounting depth: 16.63” (42.24 cm) behind front rack ears
Mounting depth: 16.63” (42.24 cm) behind front rack ears
Weight
40 lbs (18.1 kg)
40 lbs (18.1 kg)
Power Requirements
100, 120, 230-240 Vac, 50-60 Hz
1200 Watts
1200 Watts
Test Conditions
120Vac, 60Hz line input voltage maintained
120Vac, 60Hz line input voltage maintained
All channels operating unless otherwise noted
Due to our efforts for constant improvements, features and
specifications listed herein are subject to change without notice.
specifications listed herein are subject to change without notice.