Руководство Пользователя для Acer 4400

Chapter 3
Award BIOS

Onboard Parallel
Port

This item controls the onboard
parallel port address and interrupt.

Note: If you are using an I/O card
with a parallel port, make sure that
the addresses and IRQs do not
conflict.

378/IRQ7

3BC/IRQ7

278/IRQ7

Disabled

Parallel Port EPP
Type

This item lets you select the EPP
mode.

EPP1.9

EPP1.7

Onboard Parallel
Mode

This item lets you set the parallel
port mode.  The mode options are
Normal (Standard and Bidirection
Parallel Port), EPP (Enhanced
Parallel Port) and ECP (Extended
Capabilities Port).  Normal is the IBM
AT and PS/2 compatible mode.  EPP
enhances the parallel port
throughput by directly writing/
reading data to/from parallel port
without latch.  ECP supports DMA
and RLE (Run Length Encoded)
compression and decompression.

EPP

Normal

SPP

ECP

ECP/EPP

Onchip USB 1 - 2

This item is used to enable or disable
the Onchip USB.

Enabled

Disabled

USB Keyboard
Support

This item lets you enable or disable
the USB keyboard driver within the
onboard BIOS. The keyboard driver
simulates legacy keyboard command
and lets you use a USB keyboard
during POST or after boot if you
don't have a USB driver in the
operating system.

Enabled

Disabled

Parameter

Description

Options

Ap4400-e.book Page 66 Friday, October 1, 1999 2:09 PM