Руководство Пользователя для Acer 6200

You must enter Setup after installing or removing SIMMs to
reconfigure the system.

Follow these steps to reconfigure the system:

1.

Turn on the system.  A memory error message appears,
indicating that the total memory does not match the value stored
in CMOS.

2.

Press 

+

+

 to enter Setup.  A warning message

appears indicating a wrong memory configuration.

3.

Press 

 twice to exit and reboot the system.

The system boots with the new memory configuration.

The system board supports four IDE hard disks, or any other IDE
devices, through the two onboard PCI IDE interfaces.  See Figure 1-2
for the location of the IDE interfaces.

Follow the instructions in the housing installation manual on how to
install a hard disk in the system.  Connect the cables according to the
IDE hard disk configuration in Table 1-4.

Table 1-4

IDE Hard Disk Configuration

HDD Channel 1

Hard disk 0

Hard disk 1

HDD Channel 2

Hard disk 2

Hard disk 3/
IDE CD-ROM drive