Руководство Пользователя для Epic wide
www.epicstealthcam.com
3
Low battery indication: When the batteries are low, the half battery icon will begin to flash continuously along
with the beep sound for 60 seconds. This is a warning to replace the batteries with fresh ones or the unit will
power down automatically.
with the beep sound for 60 seconds. This is a warning to replace the batteries with fresh ones or the unit will
power down automatically.
To turn the EPIC on press the M button once.
To turn the EPIC off press and hold the M button.
NOTE: After the unit is turned off, you will need to wait 5 seconds before turning the EPIC back on.
Beep tone
Beep (on/off) setting allows the user the option of turning on or off the beep sound when pressing buttons.
Turn the EPIC on by pressing the MODE (M) button. Next press the Mode (M) and SHUTTER (S) button
together.
together.
Press the S button to select either tone on or tone off. Then press the M
button to confirm the setting and return to AVI mode.
button to confirm the setting and return to AVI mode.
Note:
If beep tone is set to OFF, you will only hear the tones when entering beep tone setting, or when the battery is
low.
If beep tone is set to OFF, you will only hear the tones when entering beep tone setting, or when the battery is
low.
Set Video Resolution / Still Resolution /Burst Mode / Zoom
Turn on camera. The default setting is for AVI video clips, and the screen should appear as shown here.
Turn on camera. The default setting is for AVI video clips, and the screen should appear as shown here.
VIDEO can be recorded in either High or Low resolution. While in the video capture screen
shown on the right, press and hold the S button until ESC appears on the LCD screen. Press
M to enter resolution setting mode. RES will appear on the LCD screen. Press S to confirm
this mode selection. Press M to scroll through the resolution choice. Three stars for High
(VGA) or one star for Low (QVGA). Once you have selected the desired resolution, press S
to confirm the resolution setting. Press M until the ESC screen appears, then press S to
return back to the Video capture screen.
shown on the right, press and hold the S button until ESC appears on the LCD screen. Press
M to enter resolution setting mode. RES will appear on the LCD screen. Press S to confirm
this mode selection. Press M to scroll through the resolution choice. Three stars for High
(VGA) or one star for Low (QVGA). Once you have selected the desired resolution, press S
to confirm the resolution setting. Press M until the ESC screen appears, then press S to
return back to the Video capture screen.
To start recording, press S and the EPIC will capture video until you press the S button
again to stop the recording. During video recording the LCD screen will show recording
length in seconds.
again to stop the recording. During video recording the LCD screen will show recording
length in seconds.