Справочник Пользователя для Aten kh-0116

KH0116 User Manual

10

In a Single Stage installation, there are no additional switches daisy chained 
down from the first unit. To set up a single stage installation do the following:

1. Plug your keyboard, mouse, and monitor into the unit's Console Ports.

2. Use KVM cable sets (as described in the Cables section on p. 4), to 

connect any available Computer Port to the Keyboard, Video and Mouse 
ports of the computer you are installing.

Note: Ignore the Daisy Chain Ports at this time. They are only used when 

daisy chaining additional KH0116 units. Daisy chaining is described 
in the next section.

3. Plug the female end of the power cord into the KH0116's Power Socket; 

plug the male end into an AC power source.

4. Turn on the power to the KH0116.

5. Turn on the power to the computers.

Note: Information regarding installing a Remote Console is given on page 13.

kh0116-v2.book  Page 10  Wednesday, March 22, 2006  4:53 PM