Справочник Пользователя для Aten kh-0116
KH0116 User Manual
38
Skip Mode
This feature allows you to switch between computers in order to monitor them
manually. You can dwell on a particular port for as long or as little as you like
- as opposed to Auto Scanning, which automatically switches after a fixed
interval. To invoke Skip Mode, key in the following Hotkey combination:
manually. You can dwell on a particular port for as long or as little as you like
- as opposed to Auto Scanning, which automatically switches after a fixed
interval. To invoke Skip Mode, key in the following Hotkey combination:
1. Invoke Hotkey Mode (see p. 35).
2. Key in [Arrow]
Where [Arrow] refers to one of the Arrow keys. After you press
[Arrow], you automatically exit Hotkey Mode, and enter Skip Mode
where you can switch ports as follows:
where you can switch ports as follows:
Once you are in Skip Mode, you can keep on skipping by pressing the
Arrow keys. You don't have to use the [NumLock] + [-] combination
again.
again.
While Skip Mode is in effect, ordinary keyboard and mouse functions
are suspended - only Skip Mode compliant keystrokes can be input.
You must exit Skip Mode in order to regain normal control of the
console.
You must exit Skip Mode in order to regain normal control of the
console.
3. To exit Skip Mode, press [Esc] or [Spacebar].
←
Skips from the current port to the first accessible port previous to it.
(See Scan/Skip Mode, p. 25, for information regarding accessible
ports.)
(See Scan/Skip Mode, p. 25, for information regarding accessible
ports.)
→
Skips from the current port to the next accessible port.
↑
Skips from the current port to the last accessible port of the previous
Station.
Station.
↓
Skips from the current port to the first accessible port of the next
Station.
Station.
kh0116-v2.book Page 38 Wednesday, March 22, 2006 4:53 PM